Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Georgetown?
Spring replacement in Georgetown, DC typically costs $180 to $340 for one spring. Because torsion springs almost always fail in matched pairs, most Georgetown homeowners end up replacing both, which puts the job at roughly $360 to $680. The written estimate we provide before any work starts sets the final price, and it’s free.
If your door slammed down or won’t lift at all, stop using it and call us at (877) 676-2031. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to your door the same day in most cases. Spring work is dangerous, and a trained technician is the right call for it.
Key Takeaways
- One torsion spring: $180 to $340 in Georgetown. A matched pair: about twice that, $360 to $680.
- Extension springs usually cost less per spring but nearly always need a pair and safety cables.
- Two springs in a matched pair should be replaced together; replacing one leaves the old one as a near-term failure.
- The free written estimate is the price. No surprises on the invoice.
- Same-day spring repair is available when you call before the day fills.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work breaks down in estimated ranges for the Georgetown market. These are typical figures, not a quote; your written estimate is the number that matters.
| Work | Typical Estimated Range |
|---|---|
| Torsion spring replacement (one spring) | $180 – $340 |
| Torsion spring replacement (matched pair) | $360 – $680 |
| Extension spring replacement (per spring) | $130 – $280 |
| Spring replacement plus cable repair | $130 – $250 for cables, added to spring cost |
| Track realignment, if the door came off track | $120 – $240 |
| Roller replacement, if rollers are worn or bent | $110 – $220 |
| Panel replacement, if the door was damaged when it fell | $250 – $500 |
| Opener repair, if the opener was stressed or damaged | $120 – $320 |
| Full garage door repair, combining several items | $150 – $600 |
| New door installation, if the door is beyond repair | $700 – $2,200 |
What pushes the number up or down? The biggest variable is how many springs your door has and their size. A single-car door often carries one torsion spring; a double door carries two, and heavy wood doors in Georgetown’s older homes sometimes need a thicker wire gauge that costs more. The second factor is collateral damage. A spring that breaks and lets the door drop can bend a track, crack a bottom panel, or strain the opener, and those add line items. The third is access: tight garages, low headroom, and doors mounted close to the ceiling take longer to work on safely, and that time is reflected in the estimate.
What doesn’t change the price much: the day of the week, or how urgently you need it. We quote per job from what the door actually needs. Call (877) 676-2031 and we’ll walk through the symptoms on the phone, then confirm with a written estimate on site.
What Affects Spring Replacement Pricing in Georgetown
- Number of springs. Torsion systems on double doors carry two springs, and matched pairs are replaced together. Expect roughly double the single-spring range. Replacing just one leaves the other at the end of its life, and you’ll be paying for a second visit soon after.
- Spring type and size. Standard torsion springs are the most common. Extension springs run lower per spring, but they need safety cables and often a pair, which narrows the gap. Odd sizes and heavy-duty springs for oversized doors cost more because of the wire gauge and winding required.
- Older Georgetown homes and narrow garages. Many Georgetown garages are tucked under the house or behind an alley, with low ceilings and tight clearances. A technician needs room to set ladders and winding bars safely. When that space is limited, the job takes longer, and that shows up in the estimate.
- Collateral damage from the break. A snapped spring can drop the door hard. Bent tracks, cracked panels, worn rollers, and a strained opener all become separate repairs. We diagnose the whole door, not just the spring, so nothing gets missed.
- Brand and hardware. Doors from Clopay, Amarr, Wayne Dalton, and Raynor are all common in the area, and the spring hardware on each can differ in size and mounting. We work on all of them, so you’re not stuck hunting for a specialist who recognizes your door. The same goes for the opener side, whether it’s a LiftMaster, Chamberlain, Genie, or Craftsman unit.
- Whether you catch it early. A spring that’s stretched, gapped, or making a sharp bang when the door opens is on its way out. Replacing it before it fails means no bent track and no panel damage, which keeps the total lower. Waiting rarely saves money.
How to Save on Spring Replacement
Spring replacement isn’t a job where the cheapest bid is the safest one, but there are legitimate ways to keep the cost down.
- Get the free estimate in writing. A clear written estimate before work starts is the best protection against a surprise invoice. Ours is free, and the written number is the price.
- Replace both springs at once. If your door has a matched pair and one has failed, replacing both in a single visit usually costs less than two separate service calls, and you avoid a second failure weeks later.
- Address small issues before they compound. Worn rollers, a slightly misaligned track, or a noisy opener are cheaper to fix now than after they’ve damaged the door. Catching them during a spring visit keeps you to one appointment.
- Ask for a full diagnosis. A good technician checks the whole system while the door is apart: cables, drums, hinges, and the opener. Fixing everything in one visit is cheaper than calling back for each item.
- Don’t attempt it yourself. Torsion springs store enough energy to cause serious injury, and the winding process has no safe margin for error. A DIY attempt that goes wrong often costs more to fix than the original repair would have.
For an honest read on your door, call (877) 676-2031. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, means we can often get to you the same day. Estimates are free.
Why Spring Replacement Is a Job for a Technician
A torsion spring under tension holds the full weight of your garage door. When it’s wound, it stores a large amount of energy, and releasing that energy the wrong way can break bones or cause worse. That’s why we treat spring repair as a core specialty, not a side job. Our technicians have up to 10 years of experience with torsion and extension systems, and they know the specific hazards of each.
What we do during a spring visit: measure the old spring to match the wire size, wind count, and inside diameter exactly; inspect the cables, drums, and center bearing for wear; check that the door is balanced after the new springs go in; and confirm the opener’s force settings are correct for the new tension. That last step matters. A new spring changes how much force the opener needs, and leaving the old settings can shorten the opener’s life. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, so whether it’s your opener, your springs, or the door itself, we’re equipped to handle it.
We also carry the parts to do the full job in one visit whenever possible. If your door needs more than springs, whether that’s a track realignment, panel replacement, or a full spring replacement on a different system, we can quote it in the same estimate.
When to Call for Spring Replacement
Some spring failures are obvious. A loud bang from the garage, a door that won’t lift, or a visible gap in the spring coil are all clear signs. Others are quieter: the door feels heavier than usual, the opener strains, or the door won’t stay up when you lift it by hand. Any of those mean the spring is losing tension and should be checked.
Don’t wait for a full failure. A broken spring can drop the door unexpectedly, and that’s when tracks bend and panels crack. If you’re not sure whether your spring is the problem, call us and describe what the door is doing. We can usually tell you on the phone whether it sounds like a spring issue, and we’ll book a visit to confirm.
For urgent situations, our emergency garage door service is available for doors that are stuck open, stuck closed, or blocking a car. Call (877) 676-2031. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
FAQs – Spring Replacement Cost
How much does garage door spring replacement cost in Georgetown, DC?
Spring replacement in Georgetown typically costs $180 to $340 for one spring, or about $360 to $680 for a matched pair. The written estimate sets the final price, and it’s free. Call (877) 676-2031 for an exact quote.
Is it cheaper to repair or replace a garage door spring?
Repairing the spring is almost always cheaper than replacing the door, and that’s the right call in most cases: $180 to $340 versus $700 to $2,200 for a new door. A new door only makes sense if the panels are badly damaged or the door is structurally failing. Call (877) 676-2031 and we’ll tell you honestly which one you need.
Can you replace my springs the same day?
Same-day spring replacement is often possible when you call before the day fills. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician out to assess and usually complete the job in one visit. Call (877) 676-2031 to check availability.
Do I need to replace both springs if only one broke?
In most cases, yes. Torsion springs are installed as matched pairs and wear at the same rate, so replacing one leaves the other close to failure. A pair typically costs $360 to $680, about double the single-spring range, but it’s usually cheaper than two separate visits. Call (877) 676-2031 for an estimate on your door.
Why does my spring keep breaking?
Repeated spring failures usually point to a size mismatch, an unbalanced door, or a lack of proper cycle-rated springs for the door’s weight. If your spring broke within a year or two of the last replacement, the spring was likely the wrong gauge or the door wasn’t balanced correctly. Call (877) 676-2031 and we’ll diagnose the cause, not just swap the part.
Get Your Free Spring Replacement Estimate
If your door is struggling, don’t wait for the spring to snap. We’ll give you a clear, written estimate before any work starts, so you know the price up front. We work on the brands already on your door, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, and we handle spring repair as a core part of what we do. For more on our full range of services, see Georgetown Garage Door Repair Pros.
Call (877) 676-2031 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to your door. No surprises on the invoice, and no pressure to replace what can be repaired.
Pricing reflects the Georgetown market as of 2026. Georgetown Garage Door Repair Pros offers free estimates – call (877) 676-2031.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Marcus Jackson"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Jasmine Prince"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Simone Mosley